Home > Casting > Burnout & Melting Furnaces > Satellite Furnaces
Heavy duty steel construction with double coated protection in hammertone gray. Temperature ramp up from 0-700°F in 45 min. and 700-1400°F in an additional 15 min., approx. Features include heavy duty element, side opening door, top venting for moisture and wax escape. Convenient front viewing of control panel.

Maximum operating temp. 1800°- 2000°F.
Sort By:
Page of 1
J102 Digital Single Step Program Satellite Furnace J103 Multi Programmable Satellite Furnace J100 Manual Analog Satellite Furnace
8-1/2" x 9" x 6-1/4" Chamber Size

These units use the same one step digital controller. The operator will pre-set or key in the desired operating temperature. The unit will automatically ramp to the set temperature, automatically tune into the set temperature and hold the temperature, until the controller temperature set point is changed by the operator, either higher or lower. An optional audible alarm is available. The audible alarm will sound when the set temperature is reached.
8-1/2" x 9" x 6-1/4" Chamber Size

Both units use the same digital, programmable controllers. The units are capable of storing up to six (6) individual programs. Each of the six programs is capable of storing up to eight (8) steps per program with optional soak. Once the kiln/oven is turned on and a specific program is selected to run, the kiln/oven will run the program from start to finish. As each hold segment of the program is reached, controller displays the set hold time, and begins to display the elapsed time until the next step of the program begins.
8-1/2" x 9" x 6-1/4" Chamber Size

Satellite manual units use the same basic manual step-less type of control. The operator must manually adjust the control knob, in order to dial in the desired operating temperature, which will be displayed on the analog pyrometer. The operator must also; continually monitor the unit, as the unit will tend to drift during a soak period above the set operating temperature and adjustments will need to be made to zero in the desired operating temperature. The unit should never be left unattended during operation.
J200 Manual Analog Satellite Furnace J203 Multi Programmable Satellite Furnace J202 Digital Single Step Program Satellite Furnace
12" x 12" x 8-1/2" Chamber Size

Satellite manual units use the same basic manual step-less type of control. The operator must manually adjust the control knob, in order to dial in the desired operating temperature, which will be displayed on the analog pyrometer. The operator must also; continually monitor the unit, as the unit will tend to drift during a soak period above the set operating temperature and adjustments will need to be made to zero in the desired operating temperature. The unit should never be left unattended during operation.
12" x 12" x 8-1/2" Chamber Size

Both units use the same digital, programmable controllers. The units are capable of storing up to six (6) individual programs. Each of the six programs is capable of storing up to eight (8) steps per program with optional soak. Once the kiln/oven is turned on and a specific program is selected to run, the kiln/oven will run the program from start to finish. As each hold segment of the program is reached, controller displays the set hold time, and begins to display the elapsed time until the next step of the program begins.
12" x 12" x 8-1/2" Chamber Size

These units use the same one step digital controller. The operator will pre-set or key in the desired operating temperature. The unit will automatically ramp to the set temperature, automatically tune into the set temperature and hold the temperature, until the controller temperature set point is changed by the operator, either higher or lower. An optional audible alarm is available. The audible alarm will sound when the set temperature is reached.
Element 110v for Satellite Furnaces Element 220v for Satellite Furnaces Wax Tray 8" x 8-1/2" x 3/4" for Satellite Furnaces
Element 110v for Satellite Furnaces Element 220v for Satellite Furnaces Wax Tray 8" x 8-1/2" x 3/4" for Satellite Furnaces